Home > News > Industry News > Process of making glass bottle.....
Certifications
Most new products
Beer glass
Recommended Products
Contact us
E-mail: sales09@szrxglassware.com E-mail: sales06@szrxglassware.com E-mail: sales08@szrxglassware.com E-mail: sales05@szrxglassware.com E-ma...Contact Now

News

Process of making glass bottle, china glass bottle factory

  • Author:Thinkxing
  • Source:Ruixinglass
  • Release on :2017-02-09
process of making glass bottle, china glass bottle factory


The producing of glass bottle takes place at a glass instrumentation factory in multiple steps. the primary stage of glass-container creating begins with the new end processes, which usually use high amounts of warmth to supply and form a glass instrumentation. A chamber is initial accustomed mould liquid glass, that fed to the chamber as glass feed stock. Soda-lime glass stock accounts for the bulk (around ninety percent) of glass product, and is usually mostly comprised of silicon oxide, with regarding ten % every of quicklime and lime. tiny amounts of alumina, oxide, baryta, sulfur oxide, and mineral additionally account for regarding five % of soda-lime glass. Before melting, cullet (recycled glass) is accessorial to the stock, accounting for anyplace between fifteen and fifty % of the ultimate glass composition.

Once the stock has been fed into the chamber, temperatures within may be as high as 1675 degrees Gabriel Daniel Fahrenheit. Next, one among 2 methodology forming strategies is applied: press-and-blow or blow-and-blow.
Press-and-Blow
Press-and-blow formation takes place in a private section (IS) machine and is that the a lot of normally used methodology in glass-container production. IS machines have between 5 and twenty sections, all identical, which might every do the glass-container forming method at the same time and fully. The result’s that 5 to twenty containers may be made with one machine at an equivalent time.
When the liquid glass reaches between 1050 and 1200 degrees Anders Celsius it’s aforesaid to be in its plastic stage, and it’s throughout this section that press-and-blow formation begins. A cutting off blade is employed to chop and form the glass into a cylindrical form, referred to as a gob. The cut gob falls, and exploitation attractive force, rolls through the acceptable passage to achieve the moulds. A metal plunger presses the gob into the blank mould, wherever it assumes the mould’s form and is then termed a parison. Next, the parison is moved  into a final mould, wherever it’s blown into the mould to assume its final dimensions. This method is usually used for wide-mouthed glass containers, however also can be accustomed manufacture thin-necked bottles.
Blow-and-Blow
Like press-and-blow formation, blow-and-blow takes place in associate degree IS machine, wherever a gob is free throughout the plastic stage and moved  on to the moulds. However, in blow-and-blow formation, the gob is forced into the blank mould exploitation compressed gas to push the gob into place. The gob, currently a parison, is then flipped into a corresponding final mould wherever it’s blown once more, to make the inside facet of the glass instrumentation. Glass bottles of variable neck thickness may be created exploitation blow-and-blow formation.
After formation, bottles typically bear internal treatment, a method that makes the within of the bottle a lot of chemically-resistant, a vital issue if the bottles area unit meant to carry alcohol or alternative degrading substances. Internal treatment will happen throughout formation or directly when, and usually involves treating the bottles with a gas mixture of halocarbon. Glass containers also can be treated outwardly, to strengthen the surface or cut back surface friction.
Annealing
Once formation is complete, some bottles could suffer from stress as a results of unequal cooling rates. associate degree hardening kitchen appliance may be accustomed heat and funky glass containers to rectify stress and build the bottle stronger.
Cold finish Processes
At this stage in glass production, the bottles or glass containers are checked,inspected and prepackaged. scrutiny is usually done by a mixture of machine-controlled and mechanical scrutiny, to make sure the integrity of the ultimate product. Common faults embrace checks (cracks within the glass) and stones (pieces of the chamber that turn and area unit later on worked into the ultimate container), that processing is necessary to catch as a result of they will compromise the element. Packaging strategies can vary from plant to plant betting on the precise style of bottle and also the size of the assembly run.





So if you want to do your own colors just contact us.



Shenzhen Ruixin glassware factory is very professional,and have been in this field over 15 years. specialized in the product glassware,glass candle holder,glass perfume bottle,etc.

For more information, you can visit our website: http://www.glassware-suppliers.com or contact info@glassware-suppliers.com directly.